CHAPTER 3

Power considerations in sub-micron digital CMOS


Prev TOC Next

3.3. Fundamental limits

Fundamental limits for analog processing can be found from fig.3.3 where an analog processor is shown [2], [3]. This analog processor can be an amplifier, a filter, an oscillator etc. On the capacitor C there is a voltage VO with a peak-peak value Vpp. From the power supply is drawn a current with a mean value of IDD. Denote DQ the charge drawn from the power supply and f the frequency of the signal. Then, the total power P is:

(3.8)

Power has a minimum when the peak-peak voltage on the capacitor Vpp has a value close to the power supply voltage. The capacitor C is charged and discharged from the

 

Fig.3.3: Analog processor

power supply from a resistive path. The thermal noise generated by the resistive path will create noise on the capacitor but the band limiting action of the RC combination gives a finite contribution of noise on the capacitor, independent on the value of the resistor. The noise power on the capacitor is kT/C where k is the Boltzmann’s constant. The S/N ratio defined as the power of the signal over the power of the noise can be found from:

(3.9)

Therefore, we can relate the power P to the S/N ratio in the following manner:

(3.10)

This absolute minimum of power predicts a ten fold increase of power for every 10 dB increase in signal to noise. In fig. 3.4 we have plotted on the same picture the power per frequency for a digital processor (see Chapter 2) and the power per frequency of an analog processor as a function of S/N ratio.

Comparisons between power consumption in analog versus digital, based on this figure will predict advantages of digital processors for large S/N ratios and advantages of analog processors for low S/N ratios respectively [2], [3]. Given the fact that energy per transitions in digital ETR decreases with the decrease of the feature size (see SIA roadmap from [11]), in future, digital processors are supposed to become more power efficient even for lower S/N ratios.

 

Fig.3.4: Fundamental power limits as a function of S/N

CST: Webinar September 14, 2017

Aldec

Featured Video
Editorial
Peggy AycinenaWhat Would Joe Do?
by Peggy Aycinena
Blue Pearl: Best kept Secret in EDA
More Editorial  
Jobs
FPGA Engineer for Teradyne Inc at San Jose, CA
Technical Support Engineer EU/Germany/UK for EDA Careers at N/A, United Kingdom
Field Application Engineer for Teradyne Inc at San Jose, CA
Senior R&D Engineer...Timing Closure Specialist for EDA Careers at San Jose or Anywhere, CA
Senior Front-End RTL Design AE for EDA Careers at San Jose, CA
Upcoming Events
CODES+ISSS 2017, Oct 15-20, 2017, Lotte Hotel, Seoul, South Korea at Lotte Hotel Seoul Korea (North) - Oct 15 - 20, 2017
DVCon 2017 Europe, Oct 16 - 17, 2017, Munich, Germany at Holiday Inn Munich City Centre Munich Germany - Oct 16 - 17, 2017
11th International Symposium on Networks-on-Chip (NOCS 2017) at Seoul Korea (South) - Oct 19 - 20, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise