Logic Design for Array-Based Circuits

by Donnamaie E. White

Copyright © 1996, 2001, 2002 Donnamaie E. White



Last Edit July 22, 2001

Simulators - The Tools

Workstation simulators are capable of: executing partial circuits, of tracing waveforms or lists of circuit activity, of allowing the specification of what signals are to be traced or monitored, of allowing both internal and external signals to be displayed, and of performing timing checks within the accuracy of the array vendor's models. Listings and waveforms are available in a variety of formats.

All simulations should use some form of annotation and annotation delay files or alternative modeling procedures can be used with all simulators. Annotation software to generate the interconnect delay files may be supplied by the workstation or array vendor. If the array vendor does supply annotation files or the software to generate them for the circuit, then the array vendor's software must preempt that of the workstation vendors.

While the simulators may provide many features and output options that the designer will find useful during the circuit development, the array vendor may restrict the type of simulation and the output option that may be submitted. Designers should review the chosen vendor's rules before beginning the simulation process.

Non-Native Simulators

Several workstation graphic capture systems are no longer tied to their native simulators or may have more than one "native" simulator.

Netlist conversion software allows selected "front-ends" to communicate to the LASAR 6, Verilog, or other simulators that can be located on a remote mainframe or resident on the workstation platform.

For example, as of 1994, Dazix, Valid and Mentor systems will input to their own simulators and to the Verilog simulator. Conversion programs allow the VAX/VMS LASAR 6 simulator to be used with the Dazix, Valid or Mentor netlist. (AMCC made use of Lasar 6 as its RaceCheck package in this manner.) Other combinations of front-ends and simulators are available.

The simulators that can be used will be determined by the array vendor. Each simulator requires timing modeling for each specific library. A vendor may support one resident simulator and not others for a given workstation.

Teradyne's LASAR 6

LASAR 6 is a software simulator originally intended as a tool to aid Test Engineers. LASAR 6 is a true min/max simulator that correctly handles reconvergent fan-out. Reconvergent fan-out occurs when two signals that can be traced back to a common point must have their timing evaluated relative to each other.

The evaluation of Tsu and Th at the input to the second stage of a shift register would be one such case. The min/max ambiguity that exists at the driving point of the clock net is the same at the input to both the first stage and the second stage. It must be removed before the evaluation of the data and clock relationship at the input to the second stage.

The need for min/max simulation is generally required because of the possible propagation delay time differences that might occur on any two structures on the same die. This is generally referred to as "on chip tracking".

LASAR 6 also allows the skewing of the primary inputs to account for the tester characteristics. This means that, if the tester specification says that an input transition will be within plus or minus 3 ns from the time it is told to change, then we can skew the inputs to the simulation by plus or minus 3 ns. This makes sure that the patterns will work when run on the tester. These advanced capabilities found in LASAR 6 are not available in the most commonly used EWS logic simulators.


Copyright @ 2001, 2002 Donnamaie E. White, White Enterprises
For problems or questions on these pages, contact dew@Donnamaie.com

S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy