To get to MathWorks’ corporate headquarters outside Boston, take the Red Line to the Orange Line to Back Bay Station. Take the Commuter Rail to Natick, cross the bridge over the tracks, walk north along leafy Walnut Street for a mile and a quarter, turn left onto Route 9, and cross the grass to Apple Hill Drive. Turn left into the parking lot of the company’s campus, pick your way through the construction going on there, and look for the main reception building across from the big parking structure.
If you do all of this, and it’s 90+ degrees with 60% humidity, you’ll be totally drenched by the time you walk into the cool of the MathWorks headquarters. But no worries; the very nice person at the reception desk will send you down the hall to the closest break room where you can get a tall drink from the beverage dispenser and bring it back to the reception area to rest, recuperate, and prepare for your meeting with Ken Karnofsky.
Okay, two points of interest here: a) MathWorks is different. It’s headquartered in a residential neighborhood, not a commercial park; and b) the welcome is relaxed and not the high-pressure stuff of Silicon Valley.
Two additional points of interest: c) MathWorks is expanding. They’ve got 2400 employees currently, with an additional 200 job openings! Their Natick campus may offer a calm retreat from a humid Massachusetts afternoon, but it’s not a calm retreat from the world because when you’re there, MathWorks feels to be at the center of the world.
And d) MathWorks is definitely an EDA company, even though they don’t belong to EDAC and they don’t exhibit at DAC (although they have exhibited in the past). If you design chips, MathWorks’ MATLAB and Simulink is the gateway into your design. When it comes to EDA, MathWorks is most definitely the elephant in the room.