EDACafe Weekly Review October 23rd, 2017

I need to get a few things off my chest but first, let me state the obvious.  I have made so many terrific relationships in my nearly 20 years as a recruiter, focused solely on EDA/Semi.  During that time, I have worked with hundreds of companies, talking to and helping so many C-level executives find the right new person that will help take their company forward, and have placed more people in our EDA world than I could possibly count. Recently things have changed and by calling attention to it, I hope more companies will consider the following when engaging a recruiter and interviewing candidates.

Let me start by making one point perfectly clear; I am on the company side when it comes to the actual hiring.  Every company has and deserves the right to hire the candidate with the proper qualifications and cultural fit, and I always strive to help them do exactly that. If the candidate is deemed to be “not the right fit”, they should understandably not make an offer and let everyone know. What I am talking about in this article is more than that …I am NOT talking about the right of the company to pick the right candidate, the best candidate; I am talking about the methodology for interviewing and the respect for that process.

I can honestly say that this has been the strangest year for both me and my candidates. From companies showing a total lack of consideration for the hiring process, to the way some communicate, it has been surprising and even shocking. Companies too often forget that candidates are people with hopes, dreams and expectations…this is their lives and when applying (if they are good), they hope to get the proper respect and consideration. After all, companies (meaning the decision makers and hiring managers) forget that they were once these very same people, interviewing for their future.  Decision makers at these companies should remember back to when they were hopeful candidates and show the same respect they would have liked, for the process. Just to be clear, I am not saying “hire them”, I am saying “respect them and inform them timely of the next steps…simply keep them in the loop”.  It is common decency, something every hiring manager would expect if they were on the other side, interviewing and hoping.

We all understand that there are deadlines and other obligations that can slow or stall the process, but that should not negate anyone from informing the candidate and recruiter… that takes two minutes. After all, think about it…How hard is it to reach out and inform the candidate and if applicable, the recruiter, that they need a few more days, a week, several weeks, and keep them in the loop? That is a common sense courtesy and should always be part of the process.  As long as delays, setbacks, or whatever are communicated, everyone is informed and on the same page.  Simply saying we are busy discounts your intention and is a disservice to those interviewing.  Everyone is busy, including the candidate interviewing, who might be giving up their lunch or afternoon or whenever, or the recruiter who has spent weeks maybe months diligently searching to find the company the right candidate…we/they are all busy as well and all our time should be respected equally.

The recent lack of respect I have experienced, for the time and effort involved in the process, (shown to both the candidate and in this case, me as the contracted recruiter), is simply unnecessary and further, insensitive.  If some of the hiring managers put on the other shoe for just a moment, I think they would be more respectful of the process and more diligent in maintaining an open line of communication; after all, this candidate is hopefully the next member of your team and the recruiter is doing the job you asked them to do. Also, the recruiters business is to follow through on what you ASKED THEM TO DO…and keep the process moving forward.  The size of the company should be inconsequential, we all need to respect each other’s efforts.

My work is paid for by the companies…they ask for my help to fill certain positions.  I engage with them in good faith, spending considerable dollars and time, and we all know that time is money.  This means that I have a reasonable right for them to review my submissions, react to my submissions, and interview in good faith the candidates they like, with the ultimate goal of hiring their next team member. That process and conclusion calls for everyone working together.  What has always set me aside from other recruiters is my methodology and sensitivity to both sides during the process.  It is essential for me to make sure both sides are satisfied and comfortable with each step of the process, and that takes constant engagement. My job is to do the proper follow-up from beginning on, and understand the needs from both sides by engaging them throughout, keeping the entire process on track and helping them to address and overcome concerns. This is the best way to obtain a positive result or conversely, tell each side that the fit is not right and it is time to move on.  That can only happen if all sides communicate in a timely fashion. To lose a candidate because someone says they are TOO BUSY is almost sinful.

Bottom line, I have been shocked by the complete lack of follow through and disrespect for the process shown by some, a few companies and have heard exactly the same from several other recruiters. From stringing candidates along, to cancelling interviews and worse, to simply ignoring either the submission or the follow up…this has to change as we are–and we deserve–better than that, and by we, I mean the candidates and the recruiters being engaged.   I have been doing this for 20 years exclusively in EDA. I have built fantastic relationships with so many folks in EDA and that is clearly evident when I walk the halls at DAC or other shows or from the number of emails and comments I receive. My reputation is stellar and I am so often told that I am the best in the business and honestly, I like to think I am.  😉  I/we deserve the same respect we give and always show the companies and their team.

Thank goodness, the vast majority of the companies I work with care about the candidates they are considering and do not waste their time, as well as care about the work recruiters do, I do.  It is the few that are simply clueless and think “their time” is all that matters that makes the spirit of the process problematic and downright frustrating.  That is simply not right as we are ALL WORKING HARD and we must all respect each other’s efforts during the process, and someone needed to draw attention to the issue as it is so easily rectified.

Even though business seems robust, hiring has certainly slowed. We are seeing a clear pendulum swing to more candidates looking than companies hiring. It is much harder to extract candidates these days.  The need for stellar candidates still drives the market and keeps us/me in business.  Companies’ needs are more exacting, which also limits the number of qualified candidates for those hard to fill positions and ultimately the hiring thereof.  Now more than ever, the information in your resume is so critical.  Finding the right fit still remains the battle, and makes the need for specialists like us ever more pressing,

ARM looks quite promising as I have a lot of scheduled appointments and companies that have fortunately expressed a desire to work together, as they realize it is still incredibly difficult to find the right candidates.  My chest feels so much lighter now and my trademarked White Jacket should fit better….hope to connect with a lot of old friends, clients and candidates while in the Valley or at ARM…say hi when you see me.

 

Teklatech: Work smart, Not hard
October 19, 2017  by Peggy Aycinena

 


Copenhagen-based Teklatech is such an interesting example of an EDA company
: similar in many ways to other organizations in the ecosystem, but highly unusual as it is based in Denmark. When Founder & CEO Tobias Bjerregaard and I spoke by phone this month, he began with the motivation for his company’s technology.

The discussion then moved to the business challenges within EDA, a topic that Bjerregaard said he always enjoys discussing. As he feels that Teklatech is providing critical solutions for today’s semiconductor designs, it’s not surprising that his enthusiasm here is palpable, for the industry and the trends that drive it.

Bob Smith: Expanding horizons for ESD Alliance
October 19, 2017  by Peggy Aycinena

 


The Electronic System Design Alliance began life as the EDA Consortium over 25 years ago
. Early last year, EDAC morphed into the ESD Alliance thanks to the efforts of many, not the least being ESD Alliance Executive Director Bob Smith, now in his third year serving in that role.

As currently I am mid-way through the process of speaking to the leadership of all of the member companies in the ESD Alliance, it was good to talk recently with Smith and discuss his vision for the future of the organization. His enthusiasm mirrors that of the many companies I have spoken with so far.

For a long time I have been a fan of code coverage tools that are embedded into the simulators themselves, and which give you the ability to switch easily between the code and the coverage results. It is particularly helpful to have a way of navigating the hierarchy, selecting a coverage result and then being able to look into the source code and make changes.

I recently had occasion to explain to someone how the feature works in Aldec’s Riviera-PRO, and to reflect on the tool developments that led to this great capability. As you may be aware, Aldec has a number of legacy coverage tools that allow you to view the coverage results from within the simulator; and which give you easy access to the coverage results and the corresponding lines of code. With the introduction of our unified coverage database – in .acdb format – it became possible to see the code coverage results in a more flexible format. The biggest boost, in my opinion, was the introduction of a cross-probing capability.

For those of you who are wondering how to use this feature.

  • Open Riviera-PRO 2016.06 or newer and run your design with Coverage Enabled.
  • Open the datasets window (View-> Hierarchy and Objects-> Datasets).
  • Right-click in the window and select Add.
  • Add the .acdb file associated with your design (it should show up as Simulation n, where n is number).
  • Click on the newly added database.

For the rest of this article, visit the Aldec Design and Verification Blog.

Zynq-based Embedded Development Kit for University Programs
October 17, 2017  by Farhad Fallahlalehzari

Creativity and innovation, which lead the society to success, rest on the foundational institutions such as schools and universities. They provide fertile soil to seed, grow and flourish enterprises. To harvest more within an industry, the ecosystem needs to be enriched where the seeds are grown. Considering that the university’s courses are the nutrition to student, they need to be designed in a productive manner as they will provide the next generation of engineers. By providing the necessary platform in addition to the rich and informative tutorials, the quality of the input information for students would be assured. Particularly in the field of Electrical and Computer Engineering, it is important that students get as much hands on experience as possible, and tackle design challenges – such as HW/SW co-design and co-verification – before entering the job market; for their own benefit as well as the industry as a whole.

In this blog, you will become familiar with the TySOM Education kit (TySOM EDU) package designed for the university courses related to hardware design and embedded system design researches.

The TySOM EDU contains a TySOM embedded development board, Riviera-PRO advanced hardware simulator and informative tutorials and reference designs. Although it is possible to choose any development board from the TySOM embedded development board family, the TySOM-1A-7Z010 would be the most cost-effective solution for most university projects.

TySOM-1A-7Z010 (ZynqTM) is a ready-to-use and feature-rich embedded development board which provides the required peripherals to tackle both basic and advanced Zynq-based projects. The XC7Z010 is based on the Xilinx® All Programmable System-on-Chip (SoC) architecture, which integrates a dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. Coupling the device to a rich set of peripherals for connectivity, communication and multimedia, makes this board ideal for university projects requiring HW/SW co-design.  For the rest of this article, visit the Aldec Design and Verification Blog.

DownStream: Solutions for Post Processing PCB Designs


You are registered as: [anajafi@civilservicesinc.com].

CafeNews is a service for EDA professionals. EDACafe.com respects your online time and Internet privacy. Edit or Change my newsletter's profile details. Unsubscribe me from this newsletter.

Copyright © 2017, Internet Business Systems, Inc. — 25 North 14th Steet, Suite 710 San Jose, CA 95112 — +1 (408) 882-6554 — All rights reserved.