Open side-bar Menu
 The Breker Trekker

Posts Tagged ‘graph’

Report from the 16th MTV Workshop

Wednesday, December 16th, 2015

Do you want to hear all the behind-the-scenes dirt from a workshop on the future of the MTV cable channel? Well, you’ll have to look elsewhere. “MTV” in this case means the International Workshop on Microprocessor Test and Verification, which celebrated its 16th incarnation in Austin two weeks ago. Although the name of the workshop has officially expanded to “Microprocessor and SOC Test and Verification” rest assured that the delightfully ambiguous abbreviation “MTV” will remain.

This was only my second time at this event, but I wish that I had been able to attend more. The setting is the top floor of the Hyatt Regency, with great views of Lady Bird Lake (formerly Town Lake) and downtown Austin. However, I noticed that recent high-rise construction has now blocked the sight of the Texas State Capitol from the hotel. The view might be distracting if not for the fact that the technical committee put together an interesting and diverse program, including a panel on portable stimulus.

(more…)

Mystic Secrets of the Graph – Part Three

Thursday, December 10th, 2015

The past two weeks, we’ve been having a bit of fun playing alchemist and letting readers in on some of the deep, dark secrets of graph-based verification technology. This week, we conclude the series by showing some additional capabilities for our scenario models that are easy to control and view in a graph visualization. Our point is, of course, that graphs are a natural way to represent data flow and verification intent with no advanced degrees from MIT, IIT, or Hogwarts required.

As a quick reminder, graph-based scenario models begin with the end in mind and show all possible paths to create each possible outcome for the design. They look much like a reversed data-flow diagram, with outcomes on the left and inputs on the right. Breker’s Trek family can traverse the graph from left to right, randomizing selections to automatically generate test cases tailored to run in any target platform. Today, we continue using our example of a scenario model to verify that an automobile can move forward or stop.

(more…)

Mystic Secrets of the Graph – Part Two

Thursday, December 3rd, 2015

Last week, we began exploring some of the ancient, mysterious powers of graph-based scenario models to show their power for verification and ability to capture the verification space, many aspects of the verification plan, and critical coverage metrics. We’re just kidding about the first part; there’s nothing at all mystical or magical about graphs. In fact, this series of posts is intended to show the opposite and demonstrate with a easy-to-follow example the value of graphs.

As we noted in our last post, graph-based scenario models are simple in concept: they begin with the end in mind and show all possible paths to create each possible outcome for the design. They look much like a reversed data-flow diagram, with outcomes on the left and inputs on the right. An automated tool such as Breker’s Trek family can traverse the graph from left to right, randomizing selections to generate test cases that can run in any target platform.

(more…)

Mystic Secrets of the Graph – Part One

Tuesday, November 24th, 2015

If there’s one thing that Breker is known for, it’s the use of graphs for verification. From our earliest days, we harnessed the abstraction and expressive power of graph-based scenario models to capture the verification space, many aspects of the verification plan, and critical coverage metrics. As we reported in a post a few weeks ago, it looks certain that the industry will follow our lead and base the upcoming standard from Accellera‘s Portable Stimulus Working Group (PSWG) on a graph representation.

As discussions have proceeded both within the PSWG and informally with interested parties, it has become clear that “graph” may not mean the same thing to all people. Our view of graphs is precisely defined in a way that makes it easy for users to create them and feasible for our tools to generated complex, multiprocessor test cases from them. Most of the key concepts can be communicated easily by the use of a familiar example, which we will begin in today’s post and continue next week.

(more…)

Sage Advice for Startups

Friday, October 16th, 2015

We’re coming up to the two-and-a-half-year anniversary for The Breker Trekker, with 124 published posts. Initially I promised a post every other week, but after looking at the viewing patterns I quickly realized that I had to publish every week to establish a consistent audience. There’s always something to talk about in this fast-paced world, whether something new at Breker, standards activity, observations about the EDA industry, or analysis of the customers who drive our business.

Today I’d to acknowledge a second Breker blog that has actually been around longer than this one. Just over three years ago, Breker board of directors member Michel Courtoy started a series of posts in Electronic Engineering Times to offer advice to startups. He has published 28 such posts, and has covered an amazing amount of territory. I suppose that I should have done some “cross-promotion” earlier, but at this point I would like to highlight some of Michel’s sage advice. (more…)

The Results Are In, and Graphs Win!

Friday, October 2nd, 2015

Anyone who has followed Breker for any length of time knows that our key technology is the ability to generate both Universal Verification Methodology (UVM) testbench transactions and C test cases running on SoC embedded processors automatically from graph-based scenario models. Yes, that’s a long sentence but it’s most of the “elevator pitch” that we might deliver to a potential investor or to a visitor at a trade show booth asking what we do.

For the purposes of today’s post, note that graphs are the root of the solution we provide. Ten years ago, when we first began talking about the idea of graphs as the basis for functional verification of complex chip designs, we were the proverbial pioneer with arrows in our back. But many successful customer engagements and the ever-rising need for better verification have validated our position. Graphs are clearly the “next big thing” in verification and we’d like to explain why.

(more…)

There Is No Silver Bullet for Low-Power Verification

Wednesday, September 23rd, 2015

Anyone who reads The Breker Trekker from time to time needs no convincing from me that verification is a huge challenge for today’s complex chips. Breker’s Trek family of products exists, along with dozens if not hundreds of other EDA products, specifically to address functional verification. There are more technologies, tools, platforms, libraries, and methodologies than any one verification engineer can possibly learn and use on a day-to-day basis.

Why this diversity of solutions? As I first observed in Electronic Engineering Times nearly a decade ago, there is no silver bullet for verification. The problem is both so broad and so deep that no single tool or technology will ever satisfy the need. It takes a mix of solutions, guided by methodologies, to have any chance of first-silicon success. Low-power verification is an area where this is especially true, and unfortunately there is no silver bullet to be found here either.

(more…)

Riding the Portable Stimulus Wave

Wednesday, September 16th, 2015

Last week, we discussed the details of a noteworthy press release that we issued with Cadence and Mentor Graphics announcing a joint contribution to the Portable Stimulus Working Group (PSWG) of Accellera Systems Initiative. As we expected, this release stirred up a lot of interest in portable stimulus. The timing was perfect, both because of today’s deadline for contributions to the PSWG and because of last week’s DVCon India conference. I’d like to provide some updates on both activities.

First of all, the three companies did upload our joint contribution document to the PSWG internal Web site today in time for the deadline. Please note that, as per the rules for Accellera and most other standards groups, working documents are not available to the general public. If you’d like to see the contribution and follow the evolution of the standard, please consider joining the PSWG. If your company is not yet a member of Accellera, then please alert your standards manager to the benefits of participation.

(more…)

Breker, Cadence, and Mentor Accelerate Portable Stimulus Standard

Tuesday, September 8th, 2015

This morning, Breker issued a press release with Cadence and Mentor Graphics announcing a joint contribution to the Portable Stimulus Working Group (PSWG) of Accellera Systems Initiative. We expect that this news may be surprising to much of the EDA world, so we’d like to take today’s post on The Breker Trekker to fill in some background and offer you the opportunity to ask questions. Please note that we are speaking only for Breker in this post although we doubtless share many opinions with our co-contributors.

Let’s start with a quick summary of how Accellera works so that all readers understand the context for this major contribution. The portable stimulus effort started with a Proposed Working Group last year that assessed the interest in a standard and defined a set of more than 100 requirements that such a standard would have to satisfy. Accellera approved the formation of the PSWG and we began meeting in March of this year. We have refined the requirements list and also developed a set of “use cases” showing the sort of real-world verification problems that a standard would have to address.

(more…)

Life on the Embedded-EDA Frontier

Wednesday, September 2nd, 2015

A month ago, our blog post on The Breker Trekker concerned life on the hardware-software frontier. We discussed the ever-shifting line between hardware and software and how we at Breker seem to be straddling that line as we generate embedded C/C++ test cases for hardware verification. Yesterday we published an article on the ongoing merger between the worlds of embedded systems and EDA. We made a number of observations about how the two industries are drawing closer together.

We didn’t talk about Breker in yesterday’s article, but today we’d like to connect these two threads and talk about how we are now straddling the increasingly fuzzy line between embedded and EDA verification. This is a topic we’ve discussed internally from time to time, and we have taken some steps into the embedded world by exhibiting at ARM TechCon and publishing articles in magazine and on sites geared toward embedded designers and programmers.

(more…)

CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy