Open side-bar Menu
 The Breker Trekker

Posts Tagged ‘bring-up lab’

Expanding Our Scope to Multi-SoC System Verification

Wednesday, February 3rd, 2016

For more than four years now, Breker has branded itself as “The SoC Verification Company” and many people acknowledge our expertise in this domain. As we have discussed before on The Breker Trekker, our initial products focused on generating purely transactional tests for a simulation testbench, usually compliant with the Accellera Universal Verification Methodology (UVM) standard. When we extended our products to generate C code that runs on the embedded processors found within SoCs, we delivered on our “tagline” promise.

Since our early focus on simulating an SoC, we have expanded our technology and our product line to generate C test cases that run on embedded processors in emulation, FPGA prototypes, and actual silicon in the bring-up lab. In talking about what we do, we struggle to choose between “SoC” and “system” since for many of our customers the terms are synonymous. But we also have users verifying multi-SoC systems, and today we’d like to address that topic.

(more…)

Please Welcome the Accellera Portable Stimulus Working Group

Wednesday, February 11th, 2015

As you may have seen this morning, the EDA standards organization Accellera officially announced the formation of the Portable Stimulus Working Group (PSWG). This group has the charter to “develop the electronic industry’s first standard for portable test and stimulus. When completed and adopted, this standard will enable a single specification that will be portable from IP to full system and across multiple target implementations.”

Regular readers will note that this wording sounds very familiar. At Breker, we’ve been talking about vertical reuse from IP to SoC and horizontal reuse across all verification platforms for years. At times we’ve felt like pioneers with arrows in our back. The formation of the PSWG is a validation that we’ve been heading in the right direction. We’re excited to see the industry embracing the challenges of SoC verification and starting to work on a new standard to address these challenges.

(more…)

What to Run on Day One in SoC Simulation

Thursday, February 5th, 2015

Two recent blog posts discussed what you should run when you first map your system-on-chip (SoC) design into an emulation platform and when you have your first fabricated chips from the foundry in your bring-up lab. We pointed out that trying to boot an operating system and run applications should not be the first step because production software is not designed to find and debug lingering hardware design errors. We recommended running the multi-threaded, multi-processor, self-verifying C test cases generated and optimized for hardware platforms by our TreSoC-Si product.

As you may know, TrekSoC uses the same graph-based scenario models as TrekSoC-Si, but optimizes the generated test cases for virtual prototypes, simulation, and simulation acceleration. In this post, we ask a similar question: what should you run in simulation when you first have the RTL for your SoC assembled and ready to be verified? Of course our answer will be the test cases generated by TrekSoC.  However, there are some advantages of simulation over hardware platforms that foster a more extensive methodology for verification with Breker’s products.

(more…)

What to Run on Day One in the Bring-Up Lab

Tuesday, January 20th, 2015

Last week’s blog post raised the question of what you should run when you first map your system-on-chip (SoC) design into an emulation platform. We pointed out that trying to boot an operating system and applications immediately was a challenge because these are complex pieces of production software not designed to find lingering hardware design errors or to debug such errors easily even if detected. On many projects, the production software isn’t even available early enough to be used for design verification.

We strongly recommended running the multi-threaded, multi-processor, self-verifying C test cases generated by our Trek family of products. These “bare metal” test cases run on your SoC’s embedded processors at every stage of the project. TreSoC-Si specifically generates test cases tuned for emulation and FPGA prototype platforms. But what should you run when your fabricated chip first arrives back from the foundry? The answer is the same. TrekSoC-Si also generates test cases for silicon, ideal for use in your bring-up lab. Let’s explore this idea a bit more.

(more…)

CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy