Open side-bar Menu
 What's PR got to do with it?

Posts Tagged ‘A/MS’

Who’s getting hit by the double whammy of verification?

Thursday, October 25th, 2012


Piyush Sancheti

In a recent article written by EDA industry watcher Ann Steffora Mutschler, Atrenta’s VP of Product Marketing Piyush Sancheti pointed to the curse of the verification double whammy for engineers:

“For verification engineers and for designers, this is a double whammy,” noted Piyush Sancheti, vice president of product marketing at Atrenta. “If you ask a digital design or digital verification team, they will tell you that low-power design and the introduction of analog/mixed-signal components on what used to be a simple digital chip is a significant verification challenge. For verification engineers what this means is your finite state machines or your control logic just got that much more complicated. If you go from 2 domains to 20 domains, your verification complexity just increased an order of magnitude.”

We caught up with Piyush in the Atrenta hallway and asked him to elaborate on his statement.  Here’s what he said:

Ed:   So what is the double whammy and why should we care?

Piyush: With the onset of A/MS and low power requirements, digital design teams now have to contend with two new foreign entries to their previous monolithic design environment.

Ed:  And they are…?

Piyush:  New logic blocks that are completely foreign to digital designers and the implementation of power management techniques like power & voltage domains. Voltage domains allow the timing critical portions of the design at a higher voltage (overdrive), and the rest at a lower voltage (underdrive). Power domains, on the other hand, allow one to turn off the power on entire blocks of the design when not in use.

Ed:  Haven’t digital designers always needed to be conscious and conscientious about power?

Piyush:  Not to the extent they must be these days.    Here’s the challenge – say you are designing a chip for a smart phone.  When you are watching a YouTube video, you don’t need the phone function, so you want to make sure that the phone functions are off.  What’s the result?  You’re saving power, or in consumer terms, preserving battery life.   But, if the smart phone gets a call, you have to be sure the phone function turns on instantly, without adversely impacting your video viewing experience.  So designers have to make sure the domains turn off and on in perfect harmony, almost like conducting a symphony.

So what’s the problem?  New power management logic that designers are not used to has been thrust on them rapidly and recently.  They need to get up to speed fast.  This is not an easy job. Not only that, but you now have very complex finite state machines that switch these functions on and off seamlessly.

Ed:  So what’s the solution?

Piyush:   A comprehensive methodology for functional and structural verification.

Ed:  Can you elaborate?

Piyush:  These complex finite state machines must be verified exhaustively for functional correctness. You need to make sure that the various functions on your smart phone wake up and shut off in a timely manner without adversely impacting the device behavior, and ultimately the user experience. With structural verification you need to make sure that the perimeter of the voltage and power domains are properly secured. When you have signals crossing one voltage domain to another, you need voltage level shifters. Similarly, you need isolation logic between power domains, to ensure that signals don’t float to unknown values when a domain is powered off.

Ed:  So what sort of tools and methodologies do you see out there to meet the double whammy challenge?

Piyush:  Well, of course, I’m most familiar with the Atrenta platform.   There are undoubtedly other ways to go about this job.  But from what I see, SpyGlass Power is being used by many large chip and system companies for static signoff of power and voltage domains. SpyGlass Advanced Lint enables exhaustive finite state machine verification using formal techniques. And with our recent acquisition of NextOp Software, we now have BugScope to ensure dynamic verification (simulation) is covering all the corner cases that are now part of your design because of this increased complexity.

Ed:  So your final words of wisdom?

Piyush:  Verification of modern day SoC designs is a daunting task. But like any complex problem a systematic approach using a combination of static and dynamic verification techniques will help you reach your device ambitions faster.




–        Note:  Lee PR does work for Atrenta.

ICScape got $28M funding, exhibits for first time at DAC

Friday, May 25th, 2012


Named by industry observers as “the biggest EDA company you’ve never heard of” and “a rare and endangered species” of EDA companies, ICScape will bolt out of stealth mode to exhibit at DAC for the first time.

Founded in 2005 by Steve Yang and Jason Xing, the company’s been busy over the last year.  How?  Merging with analog EDA vendor Huada Empyrean Software (HES), getting that US$28M infusion to fund global R&D, customer support and sales expansion, and working on OpenAccess-based product lines that we’ll probably see in some integrated form toward the end of 2012.

ICScape’s booth will greet attendees right at the entrance to the exhibit floor, in Booth 1602.   The company’s executives will be there to:

1)  talk about its technology,

2)  introduce current customers (a major silicon valley Fabless IC company and a major Silicon Valley analog device company) who will also be available at the booth to share firsthand experience,…..and

3)  ensure that ICScape will be one of the EDA names that all of you will have heard of.

See what Paul McLellan,  Mike Demler and  Brian Bailey have to say about ICScape:—ICScape

See you at DAC!



Note:  Lee PR does work for ICScape.

S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy