Open side-bar Menu
 Custom Layout Insights

Posts Tagged ‘custom IC design’

Custom Compiler In-Design Assistants (Part 1)

Saturday, June 18th, 2016

On-line Design Rule Checking (DRC) is nothing new. The technology has been in use for years in a variety of different layout editors and yet nearly every layout engineer has a love/hate relationship with it. Why? Well it really comes down to the use model and the responsiveness of the application.

At the beginning of the design process, layout engineers love on-line DRC. But as the design progresses, the relationship begins to sour. The problem is that as the layout gets bigger and more complex, the performance invariably starts to fall off until it reaches a point where it becomes unacceptable and the layout engineer simply turns it off and resorts to running the occasional batch checks.

To really be effective, on-line DRC has to be an interactive tool that is run often during the layout process, so, as such it needs to have a simple use model and have a fast response. The engine needs to be ‘built-in’ to deliver the required performance and the feedback needs to be comprehensive enough to enable the layout engineer to quickly fix the violation.

Custom Compiler Layout Assistants (Part 2)

Wednesday, June 15th, 2016

To all of you who attended DAC last week in Austin, TX–welcome back! I hope you were among the 175+ people who attended the Custom Compiler lunch event on Tuesday, June 7 to hear directly from engineers at GSI Technology, Samsung, STMicroelectronics and Synopsys’ IP group who described how Custom Compiler’s visually-assisted automation improves their productivity for both FinFET and established-node designs. We’ll be posting a videolog of the presentations on the Synopsys web site soon for those who missed the live event.

In the last blog I detailed the Symbolic Editor Layout Assistant and showed how the layout engineer can make simple graphical choices of how the layout needs to look and then have the placement taken care of by a placement engine. In this post I will outline another layout assistant: the Routing Assistant. The routing task is one that absolutely screams out for an automated approach, however past efforts have required a great deal of text-based constraints to get anything near to what you really want.

Custom Compiler’s Routing Assistant is a perfect combination of user guidance and automation. It’s a visually-assisted approach that allows the layout engineer to simply click on the starting point of the route and then drag the cursor in the direction they want the routing to follow. As the cursor moves along, behind the scenes the routing engine searches for connections that it can make. When it finds a connection it automatically taps to the pin without the layout engineer having to enter a mouse click. The user simply guides the router with the mouse and it fills in the routing details automatically.

Custom Compiler Layout Assistants (Part 1)

Wednesday, June 1st, 2016

As mentioned previously, on March 30th Silicon Valley was buzzing with excitement. Synopsys revealed Custom Compiler, a fresh approach to custom design that employs visually-assisted automation technologies to speed up common design tasks, reduce iterations and enable reuse at the SNUG Silicon Valley event. During this event, the R&D folks did a walkthrough of the technology ‘under-the-hood’ and showed the audience some cool layout assistants that leverage the graphical use model familiar to layout designers while eliminating the need to write complicated code and constraints. [Click here to view the videolog of the SNUG event.]

One of the layout assistants that was shown was the symbolic editor. This really is a must-have assistant when it comes to placing devices that need to be in a specific interdigitated pattern, like a differential pair. In the schematic, it is two symbols, but in the layout it could be hundreds of devices. The symbolic editor allows device placement to be edited in an easy and graphical manner and comes with a rich collection of predefined placement patterns. If you find a placement pattern you like, you can simply use it as-is and the symbolic editor will generate a correct-by-construction placement that you can instantiate in your layout. If you don’t find an exact match, you can easily use a pattern that is similar to what you need and rearrange the placement pattern graphically. No constraints to enter, no code to write and layout is done in minutes vs. hours.

A Personal Invitation

Monday, May 23rd, 2016

I just wanted to take a moment to personally invite you to attend Synopsys’ Custom Compiler lunch event at DAC 2016 on Tuesday, June 7 in Austin, TX. At this event, engineers from GSI Technology, Samsung, STMicroelectronics, and Synopsys’ IP Group will showcase their experiences using the new Custom Compiler custom IC design tool with Visually-assisted Automation technologies.

As you’ll recall, Synopsys unveiled Custom Compiler on March 30 of this year at SNUG Silicon Valley. Custom Compiler is a new custom IC design solution that closes the FinFET productivity gap by cutting custom layout tasks from days to hours. It offers a fresh approach to custom design that employs Visually-assisted Automation technologies to speed up common design tasks, reduce iterations and enable reuse. Visually-assisted Automation technologies are a unique set of productivity aids that leverage the graphical use model familiar to layout designers while eliminating the need to write complicated code and constraints.

S2C: FPGA Base prototyping- Download white paper

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy