Open side-bar Menu
 Aldec Design and Verification

Posts Tagged ‘do-254/cts’

Developing high-reliability FPGAs for DO-254

Tuesday, August 25th, 2015

Developing-FPGAs-for-DO-254You have been developing FPGAs for a long time, and you know your designs from top to bottom. You know every interface protocol, configuration and optimization. You can visualize your timing diagram like you can visualize your upcoming vacation in Hawaii. You can manually write down your memory mapping accurately while under oath. You can pinpoint all CDC paths and emulate metastability in your mind. You are confident that your designs are fault-tolerant and will function as intended. You are the master of your domain.

But… can you bet your life on it?

Are you willing to bet your life on your designs? What about the lives of the thousands of passengers sitting on the airplanes where your FPGA design is installed? How certain are you that it won’t fail in the field? If it were to fail, can it resume normal operation safely and timely? Not just MOST of the time, but EVERY time?

(more…)

DO-254/CTS™ solves Elbit’s major challenges

Tuesday, June 24th, 2014

Blog_img_062414Aldec has been working closely with Elbit Systems in Israel on an important DO-254 project for some time now. Using Aldec’s specialized solution DO-254/CTS™ as their primary FPGA physical testing platform, Elbit recently passed a critical EASA verification audit for DO-254/ED-80 DAL A FPGAs.

As a DO-254 evangelist, I have long recognized the value and benefits of Aldec’s solution to the avionics industry, so it was particularly rewarding to hear these words from Moshe Porian, Logic Design Verification Group Leader at Elbit Systems Aerospace Division, “Aldec helped us solve several of our verification challenges. This is the first time in Elbit’s history that we have been able to bring more than 5 FPGA devices to the audit.”

DO-254/CTS solved Elbit’s major challenges, enabling them to test in hardware 100% of FPGA pin-level requirements. As opposed to developing software test vectors, Elbit used their simulation testbench as test vectors for FPGA at-speed testing which cut their development costs. For the rest of this article, visit the Aldec Design and Verification Blog.

Does DO-254/CTS™ Support FPGAs with Serial High-speed I/Os?

Wednesday, November 20th, 2013

As a DO-254 evangelist, I travel quite a bit attending conferences and meeting customers all over the world. One question I occasionally get from engineers is whether Aldec’s mil/aero verification solution, DO-254/CTS™, supports verification of FPGA designs with high speed interfaces (for example ARINC 818, LVDS, DDR3 or PCIe).

Depending where I’m at I’ll tell them, “Oui!” or “Hai!” or simply “You bet it does”. Occasionally I’ll respond, “화장실이 어디 있어요!” in hopes that someone will kindly direct me to the nearest restroom.

For the rest of this article, visit the Aldec Design and Verification Blog.

CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy