Open side-bar Menu
 Aldec Design and Verification

Archive for December, 2014

Last call from Engineer Santa. Survey & daily drawings end Dec 12.

Thursday, December 11th, 2014

Well folks, last call from Engineer Santa. Aldec’s #12DaysofUsefulGifts giveaway will end this Friday, December 12 at 12pm midnight Pacific Standard Time.[preview_cut]

If you haven’t registered yet, you’ll want to hurry and visit www.aldec.com/survey. There you will take a brief verification survey and be entered to win.

If you’ve been keeping up with us on Twitter and YouTube, you know that we’ve given away some fun prizes already. If you are looking for some practical and useful gift ideas for the holidays, you might want to take a closer look. I’ve already talked about some of these from Days #1-4. We’ve given away more prizes since then and sent them to engineers all over the globe! Here, take a look…

(more…)

Spec-TRACER now directly integrated with IBM DOORS

Wednesday, December 10th, 2014

Spec-TRACER-DOORS-IntegrationIn response to user feedback, Aldec has developed a direct integration between IBM® Rational ® DOORS ® and our requirements management tool, Spec-TRACER™, to enable users to extend the traceability data in DOORS to FPGA design and verification elements.

Aldec has a strong 30-year+ history of asking and listening to the engineering community and we’re proud to say, thanks to your requests, that Spec-TRACER 2014.12 featuring direct integration with DOORS… is now available to test drive.

Below you’ll find an overview of the Spec-TRACER/DOORS tool flow. DOORS remains the main source and environment for managing board requirements and other higher level requirements, while Spec-TRACER remains the main source and environment for managing FPGA requirements, conceptual design data, detailed design data, test cases, test procedures, test results, traceability data and review activities. Spec-TRACER also remains the main source for generating all the pertinent reports for the FPGA project such as requirements documents, verification procedures, test results, impact analysis reports and project status reports.

For the rest of this article, visit the Aldec Design and Verification Blog.

Looking for Practical Holiday Gift Ideas?

Thursday, December 4th, 2014

Happy Holidays! We’ve made it to Day 4 of Aldec’s #12DaysofUsefulGifts giveaway. If you’ve been keeping up with us on Twitter and YouTube, you know that we’ve given away some fun prizes already. But that’s just the beginning, the prizes will get larger each day until the contest ends on December 12th!

If you are looking for some practical and useful gift ideas for the holidays, take a look at some of the fun prizes we’ve already given away.

Day #1day-1_400 Day #2day-2_400
Professional Cleaning Set for DSLR Cameras

Air Vent Mount for Cell Phones

Winner! Jonathan S.

Miles Kimball Manual Hand Held Shredder

Bushnell Falcon 7×35 Binoculars with Case

Winner! Alan S.

Day #3day-3_400 Day #4day-4_400
Magisso Tea Cup

Grillight LED BBQ Spatula

Winner! Daniel H.

Sugru Hardware Sealer

Pocketmonkey Wallet Multi-Tool

Could be you! Enter today at

www.aldec.com/survey

 

To enter Aldec’s #12DaysOfUsefulGifts drawing, visit www.aldec.com/survey. There you will take a brief verification survey and automatically be entered to win. You only need to take the survey once to be eligible for daily drawings from Dec 1st-12th. You can also earn additional chances to win by sharing the contest link and viewing the daily contest video. Follow Aldec on Twitter where we will announce each day’s winner and unveil the next day’s prize. Good luck!

 

12_gifts_banner_500

 

CST Webinar Series
S2C: FPGA Base prototyping- Download white paper



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy