Login

 Mentor Graphics 
Short Desc. : Inventra™ MCAN2 CAN 2.0 Network Controller
Overview :

The Inventra™ MCAN2 is a stand-alone controller for a Controller Area Network.
It provides an interface between a microprocessor and a CAN bus which carries out all the actions of data encoding/decoding, message management, bit timing and resynchronization involved in transmitting and receiving data over a CAN network.
The MCAN2 implements the BOSCH CAN Message Transfer Protocols 2.0A and 2.0B. Specification 2.0A is equivalent to CAN 1.2 and covers standard message formats (11-bit identifiers); specification 2.0B covers both standard and extended message formats (both 11-bit and 29-bit identifiers).


Features : - • Supports full CAN 2.0 – both 2.0A (equivalent to CAN 1.2) and 2.0B
- • Supports 11-bit & 29-bit identifiers
- • Supports bit rates from less than 125KBaud to more than 1MBaud
- • 64-byte Receive FIFO
- • Synchronous PVCI *-compatible CPU interface for easy connection to a range of microprocessors
- • Acceptance filtering
- • Software-driven bit-rate detection allowing hot plug-in support
- • Listen-Only & Self-Reception modes
- • Self Test option
- • Interrupt generated for each bus error
- • Arbitration lost interrupt with record of bit position
- • Read/write error counters
- • Programmable error limit warning
- • Broadly compatible with Philips SJA1000 in its PeliCAN mode
- • Fully synthesizable
- • Verified against Bosch CAN2.0 test suite
Categories :
Portability :
Type : Hard
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy