Overview :
The Glitch Detector IP is an analog IP aimed at detecting voltage glitches in the power supply of an integrated circuit. Voltage glitches are a common type of fault-injection attacks -also known as perturbation attacks.

The Glitch Detector IP has an extremely high sensitivity of up to 10GV/s while keeping a very low footprint of less than 0.03 mm2 (typical area for a 0.15µm process).

The Glitch Detector IP is designed to monitor voltages ranging from 1.35 V to 3.0 V. It outputs a 4 bit alarm signal, each bit corresponding to a different slope characteristic.
Features : - Detect positive and negative glitches with slopes ranging from 2 MV/s to 10 GV/s
- Extremely low footprint : less than 0.03 mm2 on 0.15 µm process
- Monitor voltage from 1.35V to 3.0V
- Outputs a 4 bits alarm signal depending on the slope of the glitch detected
- 20µA typical (standard 0.15 µm process)
Categories :
Portability :
Type : Hard
Deliverables : - GDSII
DownStream: Solutions for Post Processing PCB Designs
Verific: SystemVerilog & VHDL Parsers
TrueCircuits: IoTPLL

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy