Embedded, IP & SoC News
Submit New Event
What Would Joe Do?
Submit New Tutorial
Submit New Video
Submit New YouTube Video
Submit New Download
EDA Media Kit
Banner Ad Specifications
eMail Blast Specifications
Short Desc. :
PCI-T32MF -- 32-bit, 33 MHz Multifunction Target Interface Core
The PCI-T32MF implements a target-only PCI interface compliant with the PCI 2.3 specification. It supports a 32-bit address/data bus and operates up to 33 MHz (PCI clock).
The core offers one to eight independent PCI functions in a single chip, each implementing 64 to 256 bytes of PCI Configuration Space registers as required. Each function supports up to six Base Address Registers, with both I/O and Memory space decoding from 16 bytes up to 4GB.
The core was developed for easy reuse with ASICs or FPGAs.
- Fully compliant with the PCI Local Bus Specification, Revision 2.3.
- 33 MHz performance (PCI clock frequency)
- 32-bit datapath
- Full Target functionality, with support for these commands:
- Configuration Read, Configuration Write
- Memory Read, Memory Write, Memory Read Multiple (MRM), Memory Read Line (MRL), Memory Write and Invalidate (MWI)
- I/O Read, I/O Write
- Zero wait states burst mode
- Support all interrupt pins (INTA#, INTB#, INTC#, INTD#)
- Type 0 Configuration space
- Supports all Base Address Registers
- Supports backend initiated target retry, disconnect and abort
- Parity generation and parity error detection
- Silicon-verified (XILINX Virtex FPGA)
- PC300 prototyping board available for fast application prototyping
© 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 —
, or visit our other sites: