Faraday Technology Corp. 
Part Number : FA62655EE0001HC0HA
Overview :
The FA626 is an ultra high speed general-purpose 32-bit embedded RISC processor. It consists a synthesized CPU core, an MMU, separate caches, scratchpads, and other units. The CPU core implements the ARM V4® architecture. Configurable features are available for the caches, scratchpads, and write buffer. The FA626 runs at operation frequencies up to 500 MHz (worst case) with low operation power. It is suitable for a wide range of applications, especially those requires high performance, low cost, and low power consumption. The single-phase clock and standard-cell based approach make it easy to integrate the FA626 in any SoC design.
Features : - CPU Core
- ARM V4® instruction set
- High speed up to 500 MHz (Worse Case)
- Low operation power
- Single phase clock
- On-chip multiplier
- Address space: up to 4G bytes
- Memory-mapped I/O
- Two-level interrupt priority
- Memory Subsystem
- Instruction and data caches
- Non-blocking data cache access
- H/W cache coherence support
- Cache lockdown
- Instruction and data scratchpads
- Write buffer
- Memory Management Unit
- Enhanced ARM V4® compatible MMU
- 8-entry fully-associative ITLB 8-entry fully-associative DTLB 128-entry 2-way Unified TLB
- Hardware table walk
- Miscellaneous
- 64-bit bus interface
- Easy SoC integration
- Bi-endian support
- Power saving mode
- Support standard ARM ICE interface
- Standard ARM tool chain support
- External coprocessor interface with application-specific instruction extension (ASIE)
Categories :
Portability :
Type : Hard
DownStream: Solutions for Post Processing PCB Designs
Verific: SystemVerilog & VHDL Parsers
TrueCircuits: IoTPLL

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy