Login

 OmniPHY Inc 
Part Number : OMNIPHY-V-By-One-CTRL
Short Desc. : V By One Controller
Overview :

The complete V By One controller - works with several PHY's including OmniPhy.

Benefits:

  • Available now
  • Low power and area
  • Proven Design

Features : - • Compliant with V-by-One HS Standard v1.4.
- • Support data rates up to 4Gbps to meet application of ultra HD display.
- • TX Drivers with tunable On-Die-Termination, programmable output swing, and pre-emphasis to ensure 300mV to
- 800mV signal window.
- • Provide auto-calibrated on-die matched termination (differential).
- • Embedded ESD, boundary scan support logic.
- • Extract data and clock from the serial stream with the aid of advanced jitter buffer.
- • 10bit or 20bit wide parallel input/output.
- • Support for SSC "spread spectrum clocking" generation and handling.
- • Support 4 lane configurations for PHY.
- • Supports 16 lane operation for the Tx and Rx Controller.
- • Elastic buffers and Lane alignment.
- • Data scrambling and Clock Data Recovery (CDR) to reduce EMI
- • ESD: HBM 2KV, CDM 500V.
Categories :
Maturity : Silicon Proven
Portability :
Type :
 Hard IP 
Foundry :
TSMC
UMC
Nodes :
28nm

Deliverables : - • GDSII - compliant with DFM
- • .LEF
- • LIBERTY files for timing closure
- • Verilog
- • Netlist
- • Comprehensive documentation including SOC realization guidelines, board/package guidelines, datasheet
CST Webinar Series



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy