Login

 Cadence Design Systems, Inc. 
Part Number : IP6016
Short Desc. : NAND Flash ONFI 4 /3/2/1, Toggle 2 /1 Controller
Overview :

Controller IP for ONFI 4/NAND Flash Interface provides the logic required to integrate a NAND flash memory controller into any system-on-chip (SoC). It supports ONFI4.0, ONFI 3.x, ONFI 2.x., and Toggle Mode DDR-1/2 NAND Flash devices.  It is architected to quickly and easily integrate into any system on chip (SoC) and, when used with the Cadence NAND Flash PHY IP, connects seamlessly from the SoC bus to the I/O drivers in the ASIC I/O pad ring. The Controller IP is based on Cadence ONFI3 controller IP which is silicon proven, and has been extensively validated in many processes, FPGAs, and with multiple hardware platforms. 


Features : - Universal Flash support across all vendors
- Support for high speed memories (up to 533MT/s)
- Single-level cell (SLC) and multi-level cell (MLC) boot operation
- Scatter-gather DMA supports 32-bit or 64-bit memory addressing
- Supports pages sizes from 256B to 16kB
- Support for multi-LUN modes
- Support for multi-LUN modes
- ONFI 1, 2, 3, and Toggle 1, 2 support
- Pipelined read-ahead and write commands for enhanced read and write throughput
- Advanced ECC supports correction factors from 2 to 64 and higher
Categories :
Maturity : Available on request
Portability :
Type : Soft
Deliverables : - Clean, readable, synthesizable Verilog RTL
- Synthesis and STA scripts
- Documentation
- Sample verification testbench with test sets



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy